Difference between revisions of "OLT"

From Catatan IBM
Jump to navigation Jump to search
Tag: Manual revert
Line 47: Line 47:
11.check olt card temperature
11.check olt card temperature
  show card-temperature
  show card-temperature
12. check olt per slot
  show card slotno 2
13. check ont ip routing mode
show gpon remote-onu ip-host  gpon-onu_1/2/1:3
14. check ont konfig
show run int gpon-onu_1/4/1:2
15. reboot ont
config t
pon-onu-mng gpon-onu_1/2/1:3
reboot
16. reset factory ont
config t
pon-onu-mng gpon-onu_1/2/1:3
restore factory
17. disable/shutdown port ont
config t
pon-onu-mng gpon-onu_1/2/1:3
interface eth eth_0/2 state lock --> disable/shutdown port number 2
18. enable/shutdown port ont
config t
pon-onu-mng gpon-onu_1/2/1:3
interface eth eth_0/2 state unlock --> enable port number 2
19. release renew ont as dhcp client
config t    >>Enter configuration commands, one per line.  End with CTRL/Z.
pon-onu
pon-onu-mng gpon-onu_1/2/1:3
ip-host 1 dhcp-enable false ping-response false traceroute-response false
ip-host 1 dhcp-enable true ping-response true traceroute-response true
20. check rx/tx level uplink port
sho int optical-module-info xgei_1/21/1
21. reset slot card
reset-card slotno 2
22. swap
Use This for First Level Handling when you get Anomaly Process.
sometimes it can help you, but sometime isn’t
swap
23. show vlan summary
show vlan summary
24. check bandwidth profil
show gpon profile traffic

Revision as of 16:20, 28 January 2022

ZTE C320

command line

1. check ont status

show gpon onu state gpon-olt_1/2/3


2. check ont power

show pon power attenuation gpon-onu_1/2/3:18


3. check power interface

show interface optical-module-info gpon-olt_1/1/1


4. check ont mac address

show mac gpon onu gpon-onu_1/2/3:18


5. chesk ont uptaime and ont history logs

show gpon onu detail-info gpon-onu_1/2/3:18


6. find ont by SN number

show gpon onu by sn ZTEGC123456F


7. check ont version

show gpon remote-onu equip gpon-onu_1/2/3:18


8. check OLT uptime

show system-group


9. check olt board

show card


10. check OLT prosessor and memory

show processor


11.check olt card temperature

show card-temperature