Difference between revisions of "Switch: Huawei Initial Config"

From Catatan IBM
Jump to navigation Jump to search
 
(3 intermediate revisions by the same user not shown)
Line 9: Line 9:
Asumsi nama hostname SW-Sinyalku
Asumsi nama hostname SW-Sinyalku
  sysname SW-Sinyalku
  sysname SW-Sinyalku
* Menghapus hostname
undo sysname
==Configure Username dan Password==
system-view
aaa
local-user admin password irreversible-cipher admin@1234
local-user admin privilege level 15
local-user admin service-type ssh telnet
quit
==Configure Login Banner===
Menampilkan pesan di awal halaman login
header harus diawali dan diakhiri dengan "%"
system-view
header login information %Hanya Untuk Sysadmin Sinyalku!! Jika tidak silahkan meninggalkan halaman ini%
quit
==Configure TELNET==
system-view
telnet server enable
user-interface vty 0 4
authentication-mode aaa
protocol inbound telnet
quit
aaa
local-user ibm password chiper ibm@123
local-user ibm service-type terminal telnet
local-user ibm privilege level 15
local-user ibm wrong-password retry-interval 5 retry-time 3 block-time 5
quit
==Configure SSH==
system-view
rsa local-key-pair create
stelnet server enable
ssh server authentication-retries 2
ssh server timeout 120
user-interface con 0
authentication-mode password
set authentication password cipher ibm@1234
quit
user-interface vty 0 4
user privilege level 15
protocol inbound ssh
quit
ssh user ibm authentication-type password
ssh user ibm service-type stelnet
ssh client first-time enable
aaa
local-user ibm service-type ssh
local-user ibm privilege level 15
local-aaa-user wrong-password retry-interval 5 retry-time 3 block-time 5
quit


==Configure the VLAN==
==Configure the VLAN==
Line 40: Line 105:
IP Address = 192.168.10.1/24
IP Address = 192.168.10.1/24
  system-view
  system-view
vlan 10
description Management
name Management
quit
  interface vlanif 10
  interface vlanif 10
  ip address 192.168.10.1 255.255.255.0
  ip address 192.168.10.1 255.255.255.0
description Management
undo shutdwon
  quit
  quit
Atur Gateway
ip route-static 0.0.0.0 0.0.0.0 192.168.10.254




==Configure the Trunk and Access Port==
==Configure the Trunk and Access Port==
*Melihat Deskripsi Interface
dis int des
display interface description
===Tipe Trunk===
===Tipe Trunk===
  system-view
  system-view
  interface XGigabitEthernet0/0/1
  interface XGigabitEthernet0/0/1
  port link-type trunk
  port link-type trunk
port trunk allow-pass 10 20 100 200
description Uplink
undo shutdown
quit
* Melihat konfigurasi Interface
display current-configuration int XGigabitEthernet0/0/1
* Menghapus VLAN ID
Asumsi yang akan dihapus adalah VLAN 200
system-view
interface XGigabitEthernet0/0/1
port link-type trunk
undo port trunk allow-pass 200
q


===Tipe Data Access===
===Tipe Data Access===

Latest revision as of 08:01, 7 January 2026

Untuk menampilkan semua konfigurasi

display current-configuration

Untuk masuk ke mode konfig

system-view


Configure the Device Nama

Asumsi nama hostname SW-Sinyalku

sysname SW-Sinyalku
  • Menghapus hostname
undo sysname


Configure Username dan Password

system-view
aaa
local-user admin password irreversible-cipher admin@1234
local-user admin privilege level 15
local-user admin service-type ssh telnet
quit


Configure Login Banner=

Menampilkan pesan di awal halaman login header harus diawali dan diakhiri dengan "%"

system-view
header login information %Hanya Untuk Sysadmin Sinyalku!! Jika tidak silahkan meninggalkan halaman ini%
quit


Configure TELNET

system-view
telnet server enable
user-interface vty 0 4
authentication-mode aaa
protocol inbound telnet
quit

aaa
local-user ibm password chiper ibm@123
local-user ibm service-type terminal telnet
local-user ibm privilege level 15
local-user ibm wrong-password retry-interval 5 retry-time 3 block-time 5
quit


Configure SSH

system-view
rsa local-key-pair create

stelnet server enable
ssh server authentication-retries 2
ssh server timeout 120
user-interface con 0
authentication-mode password
set authentication password cipher ibm@1234
quit

user-interface vty 0 4
user privilege level 15
protocol inbound ssh
quit

ssh user ibm authentication-type password
ssh user ibm service-type stelnet
ssh client first-time enable

aaa
local-user ibm service-type ssh
local-user ibm privilege level 15
local-aaa-user wrong-password retry-interval 5 retry-time 3 block-time 5
quit


Configure the VLAN

Asumsi: ID VLAN = 10 Description = MGMT

system-view
vlan 10
description MGMT
quit
  • Pastikan Uplink Port sudah di mode Trunk dan mengizinkan vlan 10

Asumsi interface uplink berada di XGigabitEthernet0/0/1

system-view
interface XGigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 10
description **Uplink-to-Mikrolink**
undo shutdown
quit
  • Melihat Konfigurasi Interface
display current-configuration interface XGigabitEthernet0/0/1
  • Melihat status Interface
display interface XGigabitEthernet0/0/1


Configure the MGMT

Asumsi: IP Address = 192.168.10.1/24

system-view
vlan 10
description Management
name Management
quit

interface vlanif 10
ip address 192.168.10.1 255.255.255.0
description Management
undo shutdwon
quit

Atur Gateway

ip route-static 0.0.0.0 0.0.0.0 192.168.10.254


Configure the Trunk and Access Port

  • Melihat Deskripsi Interface
dis int des
display interface description

Tipe Trunk

system-view
interface XGigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass 10 20 100 200
description Uplink
undo shutdown
quit
  • Melihat konfigurasi Interface
display current-configuration int XGigabitEthernet0/0/1
  • Menghapus VLAN ID

Asumsi yang akan dihapus adalah VLAN 200

system-view
interface XGigabitEthernet0/0/1
port link-type trunk
undo port trunk allow-pass 200
q 

Tipe Data Access

system-view
interface GigabitEthernet0/0/1
port link-type access
port default vlan 10
undo shutdown
description kantor bendahara
quit
  • Melihat konfigurasi Interface
display current-configuration int gi0/0/1

Tipe Data Voice

system-view
interface GigabitEthernet0/0/2
port link-type hybrid
port hybrid untagged vlan 20
undo shutdown
description kantor cs
q
  • Melihat konfigurasi Interface
dis current-configuration int gi0/0/2

Configure the default Route

ip route-static 0.0.0.0 0.0.0.0 <default gateway>

Asumsi IP Gateway = 192.168.10.254

system-view
ip route-static 0.0.0.0 0.0.0.0 192.168.10.254

Configure the LACP

Create a LACP Eth-Trunk

interface Eth-Trunk <Trunk-ID>
mode lacp-static
interface eth-trunk 1
mode lacp-static
quit

interface XGigabitEthernet0/0/2
eth-trunk 1
quit

interface eth-trunk 1
port link-type trunk
port trunk allow-pass vlan 10
undo shutdown
quit
  • Melihat status
display eth-trunk 1
  • Jangan lupa untuk simpan konfigurasi yang telah dibuat
save
y