Difference between revisions of "OLT: ZTE C320 Perintah Umum"

From Catatan IBM
Jump to navigation Jump to search
Line 39: Line 39:
===check OLT prosessor and memory===
===check OLT prosessor and memory===
  show processor
  show processor


===check olt card temperature===
===check olt card temperature===
  show card-temperature
  show card-temperature


===Cek Detail Config di Interface ke arah ONT===
===Cek Detail Config di Interface ke arah ONT===
  show run interface gpon-onu_1/2/5:4
show run interface gpon-onu_1/2/5:4
 


===Cek Status Interface ONT===
===Cek Status Interface ONT===
  show gpon onu state gpon-olt_1/2/5 4
show gpon onu state gpon-olt_1/2/5 4
    
    
===Cek Nilai Optik ONT===
===Cek Nilai Optik ONT===
  show pon power attenuation gpon-onu_1/2/5:4
show pon power attenuation gpon-onu_1/2/5:4
    
    
===Cek Utilisasi Bandwith Link ONT Real Time===
===Cek Utilisasi Bandwith Link ONT Real Time===
  show interface gpon-onu_1/2/5:4
show interface gpon-onu_1/2/5:4
    
    
===Cek ONT Uptime dan History:===
===Cek ONT Uptime dan History:===
  show gpon onu detail-info gpon-onu_1/1/16:1
show gpon onu detail-info gpon-onu_1/1/16:1
    
    
===Cek Mac Address Perangkat yang terkoneksi ke ONT===
===Cek Mac Address Perangkat yang terkoneksi ke ONT===
  show mac gpon onu gpon-onu_1/1/16:1
show mac gpon onu gpon-onu_1/1/16:1
    
    
===Cek ONT Version===
===Cek ONT Version===
  show gpon remote-onu equip gpon-onu_1/1/16:1
show gpon remote-onu equip gpon-onu_1/1/16:1
    
    
===Cek Status Port di ONT===
===Cek Status Port di ONT===
  show gpon remote-onu interface eth gpon-onu_1/1/16:1
show gpon remote-onu interface eth gpon-onu_1/1/16:1
    
    
===Reboot/Restart ONT===
===Reboot/Restart ONT===
  config t
config t
  (config)#pon-onu
(config)#pon-onu
  (config)#pon-onu-mng gpon-onu_1/1/16:1
(config)#pon-onu-mng gpon-onu_1/1/16:1
  (gpon-onu-mng)#reboot
(gpon-onu-mng)#reboot
    
    
===Shutdown Port 1 di ONT===
===Shutdown Port 1 di ONT===
    config t
config t
    (config)#pon-onu
(config)#pon-onu
    (config)#pon-onu-mng gpon-onu_1/1/16:1
(config)#pon-onu-mng gpon-onu_1/1/16:1
    (gpon-onu-mng)#interface eth eth_0/1 state lock
(gpon-onu-mng)#interface eth eth_0/1 state lock
   
 
===Cek Konfigurasi PON ONU===
===Cek Konfigurasi PON ONU===
    show onu running config gpon-onu_1/1/16:1
show onu running config gpon-onu_1/1/16:1
      
      
===Check OLT Uptime===
===Check OLT Uptime===
    show system-group
show system-group
   
 
 
===Check OLT Board===
===Check OLT Board===
    show card
show card
      
      
===Check OLT Processor dan Memory===
===Check OLT Processor dan Memory===
    show processor
show processor
 
      
      
===Check OLT Temperature===
===Check OLT Temperature===
    show temperature
show temperature
   
 
===CHECKING OLT PER SLOT===
===CHECKING OLT PER SLOT===
    show card slotno 12
show card slotno 12
   
 
===FINDING ONT BY SN NUMBER===
===FINDING ONT BY SN NUMBER===
    sho gpon onu by sn ALCLB1C7DA30
sho gpon onu by sn ALCLB1C7DA30
   
 
===CHECKING ONT IP (ROUTING MODE)===
===CHECKING ONT IP (ROUTING MODE)===
    ##In This case, We used ip-host 1
##In This case, We used ip-host 1
    ##in one ONT we can create 4 IP-HOST management
 
    show gpon remote-onu ip-host gpon-onu_1/1/16:1
##in one ONT we can create 4 IP-HOST management
show gpon remote-onu ip-host gpon-onu_1/1/16:1
 
      
      
===RESET FACTORY ONT===
===RESET FACTORY ONT===
    OLT-ZTE_C320#config t
OLT-ZTE_C320#config t
    (config)#pon-onu
(config)#pon-onu
    (config)#pon-onu-mng gpon-onu_1/4/1:2
(config)#pon-onu-mng gpon-onu_1/4/1:2
    (gpon-onu-mng)#restore factory
(gpon-onu-mng)#restore factory
   
 
===HOW TO LOCK / SHUTDOWN THIRD PORT ONT===
===HOW TO LOCK / SHUTDOWN THIRD PORT ONT===
    config t
config t
    (config)#pon-onu
(config)#pon-onu
    (config)#pon-onu-mng gpon-onu_1/4/1:2
(config)#pon-onu-mng gpon-onu_1/4/1:2
    (gpon-onu-mng)#interface eth eth_0/3 state lock
(gpon-onu-mng)#interface eth eth_0/3 state lock
   
 
===HOW TO UNLOCK PORT ONT===
===HOW TO UNLOCK PORT ONT===
    config t
config t
    (config)#pon-onu
(config)#pon-onu
    (config)#pon-onu-mng gpon-onu_1/4/1:2
(config)#pon-onu-mng gpon-onu_1/4/1:2
    (gpon-onu-mng)#interface eth eth_0/3 state unlock
(gpon-onu-mng)#interface eth eth_0/3 state unlock
   
 
===HOW TO RELEASE RENEW ONT AS DHCP CLIENT===
===HOW TO RELEASE RENEW ONT AS DHCP CLIENT===
    config t
config t
    (config)#pon-onu
(config)#pon-onu
    (config)#pon-onu-mng gpon-onu_1/4/1:2
(config)#pon-onu-mng gpon-onu_1/4/1:2
    (gpon-onu-mng)#ip-host 1 dhcp-enable false ping-response false traceroute-response false
(gpon-onu-mng)#ip-host 1 dhcp-enable false ping-response false traceroute-response false
    (gpon-onu-mng)#ip-host 1 dhcp-enable true ping-response true traceroute-response true
(gpon-onu-mng)#ip-host 1 dhcp-enable true ping-response true traceroute-response true
   
 
===RESET SLOT===
===RESET SLOT===
    reset-card slotno 12
reset-card slotno 12
   
 
===SWAP===
===SWAP===
    ##Use This for First Level Handling when you get Anomaly Process.
##Use This for First Level Handling when you get Anomaly Process.
    ##sometimes it can help you, but sometime isn’t.
 
    swap
##sometimes it can help you, but sometime isn’t.
swap
 
      
      
===CHECKING VLAN SUMMARY===
===CHECKING VLAN SUMMARY===
    sho vlan sum
sho vlan sum
    sho vlan 600
sho vlan 600

Revision as of 11:01, 19 February 2022

command line

check ont status

show gpon onu state gpon-olt_1/2/3


check ont power

show pon power attenuation gpon-onu_1/2/3:18


check power interface

show interface optical-module-info gpon-olt_1/1/1


check ont mac address

show mac gpon onu gpon-onu_1/2/3:18


chesk ont uptaime and ont history logs

show gpon onu detail-info gpon-onu_1/2/3:18


find ont by SN number

show gpon onu by sn ZTEGC123456F


check ont version

show gpon remote-onu equip gpon-onu_1/2/3:18


check OLT uptime

show system-group


check olt board

show card


check OLT prosessor and memory

show processor


check olt card temperature

show card-temperature


Cek Detail Config di Interface ke arah ONT

show run interface gpon-onu_1/2/5:4


Cek Status Interface ONT

show gpon onu state gpon-olt_1/2/5 4
  

Cek Nilai Optik ONT

show pon power attenuation gpon-onu_1/2/5:4
  

Cek Utilisasi Bandwith Link ONT Real Time

show interface gpon-onu_1/2/5:4
  

Cek ONT Uptime dan History:

show gpon onu detail-info gpon-onu_1/1/16:1
  

Cek Mac Address Perangkat yang terkoneksi ke ONT

show mac gpon onu gpon-onu_1/1/16:1
  

Cek ONT Version

show gpon remote-onu equip gpon-onu_1/1/16:1
  

Cek Status Port di ONT

show gpon remote-onu interface eth gpon-onu_1/1/16:1
  

Reboot/Restart ONT

config t
(config)#pon-onu
(config)#pon-onu-mng gpon-onu_1/1/16:1
(gpon-onu-mng)#reboot
  

Shutdown Port 1 di ONT

config t
(config)#pon-onu
(config)#pon-onu-mng gpon-onu_1/1/16:1
(gpon-onu-mng)#interface eth eth_0/1 state lock

  

Cek Konfigurasi PON ONU

show onu running config gpon-onu_1/1/16:1
   

Check OLT Uptime

show system-group
 
 

Check OLT Board

show card
   

Check OLT Processor dan Memory

show processor


Check OLT Temperature

show temperature

  

CHECKING OLT PER SLOT

show card slotno 12

  

FINDING ONT BY SN NUMBER

sho gpon onu by sn ALCLB1C7DA30

  

CHECKING ONT IP (ROUTING MODE)

    1. In This case, We used ip-host 1
    1. in one ONT we can create 4 IP-HOST management
show gpon remote-onu ip-host gpon-onu_1/1/16:1


RESET FACTORY ONT

OLT-ZTE_C320#config t
(config)#pon-onu
(config)#pon-onu-mng gpon-onu_1/4/1:2
(gpon-onu-mng)#restore factory

  

HOW TO LOCK / SHUTDOWN THIRD PORT ONT

config t
(config)#pon-onu
(config)#pon-onu-mng gpon-onu_1/4/1:2
(gpon-onu-mng)#interface eth eth_0/3 state lock

  

HOW TO UNLOCK PORT ONT

config t
(config)#pon-onu
(config)#pon-onu-mng gpon-onu_1/4/1:2
(gpon-onu-mng)#interface eth eth_0/3 state unlock

  

HOW TO RELEASE RENEW ONT AS DHCP CLIENT

config t
(config)#pon-onu
(config)#pon-onu-mng gpon-onu_1/4/1:2
(gpon-onu-mng)#ip-host 1 dhcp-enable false ping-response false traceroute-response false
(gpon-onu-mng)#ip-host 1 dhcp-enable true ping-response true traceroute-response true

  

RESET SLOT

reset-card slotno 12

  

SWAP

    1. Use This for First Level Handling when you get Anomaly Process.
    1. sometimes it can help you, but sometime isn’t.
swap


CHECKING VLAN SUMMARY

sho vlan sum
sho vlan 600