Difference between revisions of "Armbian: Cara Merubah IP Address Armbian 20.10"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
== | ===Cara Pertama=== | ||
ketikkan perintah berikut untuk konfigurasi armbian melalui gui | |||
armbian-config | |||
===Cara Kedua=== | |||
Ketik perintah berikut untuk rubah melalui user interface: | Ketik perintah berikut untuk rubah melalui user interface: | ||
nmtui | nmtui | ||
== | ===Cara Ketiga=== | ||
Ubah file 'interfaces' yang berada di /etc/network/ | Ubah file 'interfaces' yang berada di /etc/network/ | ||
Latest revision as of 05:44, 18 January 2023
Cara Pertama
ketikkan perintah berikut untuk konfigurasi armbian melalui gui
armbian-config
Cara Kedua
Ketik perintah berikut untuk rubah melalui user interface:
nmtui
Cara Ketiga
Ubah file 'interfaces' yang berada di /etc/network/
nano /etc/network/interfaces
Ubah Dari:
source /etc/network/interfaces.d/* # Wired adapter #1 allow-hotplug eth0 no-auto-down eth0 iface eth0 inet dhcp #iface eth0 inet static #address 192.168.1.100 #netmask 255.255.255.0 #gateway 192.168.1.1 #dns-nameservers 192.168.1.1 # hwaddress ether # if you want to set MAC manually # pre-up /sbin/ifconfig eth0 mtu 3838 # setting MTU for DHCP, static just: mtu 3838
Menjadi:
source /etc/network/interfaces.d/* # Wired adapter #1 #allow-hotplug eth0 #no-auto-down eth0 #iface eth0 inet dhcp auto eth0 iface eth0 inet static address 192.168.0.99 netmask 255.255.255.0 gateway 192.168.0.254 dns-nameservers 8.8.8.8,8.8.4.4 # hwaddress ether # if you want to set MAC manually # pre-up /sbin/ifconfig eth0 mtu 3838 # setting MTU for DHCP, static just: mtu 3838