Difference between revisions of "OLT: ZTE C320 Perintah Umum"
Jump to navigation
Jump to search
| Line 39: | Line 39: | ||
===check OLT prosessor and memory=== | ===check OLT prosessor and memory=== | ||
show processor | show processor | ||
===check olt card temperature=== | ===check olt card temperature=== | ||
show card-temperature | show card-temperature | ||
===Cek Detail Config di Interface ke arah ONT=== | ===Cek Detail Config di Interface ke arah ONT=== | ||
show run interface gpon-onu_1/2/5:4 | |||
===Cek Status Interface ONT=== | ===Cek Status Interface ONT=== | ||
show gpon onu state gpon-olt_1/2/5 4 | |||
===Cek Nilai Optik ONT=== | ===Cek Nilai Optik ONT=== | ||
show pon power attenuation gpon-onu_1/2/5:4 | |||
===Cek Utilisasi Bandwith Link ONT Real Time=== | ===Cek Utilisasi Bandwith Link ONT Real Time=== | ||
show interface gpon-onu_1/2/5:4 | |||
===Cek ONT Uptime dan History:=== | ===Cek ONT Uptime dan History:=== | ||
show gpon onu detail-info gpon-onu_1/1/16:1 | |||
===Cek Mac Address Perangkat yang terkoneksi ke ONT=== | ===Cek Mac Address Perangkat yang terkoneksi ke ONT=== | ||
show mac gpon onu gpon-onu_1/1/16:1 | |||
===Cek ONT Version=== | ===Cek ONT Version=== | ||
show gpon remote-onu equip gpon-onu_1/1/16:1 | |||
===Cek Status Port di ONT=== | ===Cek Status Port di ONT=== | ||
show gpon remote-onu interface eth gpon-onu_1/1/16:1 | |||
===Reboot/Restart ONT=== | ===Reboot/Restart ONT=== | ||
config t | |||
(config)#pon-onu | |||
(config)#pon-onu-mng gpon-onu_1/1/16:1 | |||
(gpon-onu-mng)#reboot | |||
===Shutdown Port 1 di ONT=== | ===Shutdown Port 1 di ONT=== | ||
config t | |||
(config)#pon-onu | |||
(config)#pon-onu-mng gpon-onu_1/1/16:1 | |||
(gpon-onu-mng)#interface eth eth_0/1 state lock | |||
===Cek Konfigurasi PON ONU=== | ===Cek Konfigurasi PON ONU=== | ||
show onu running config gpon-onu_1/1/16:1 | |||
===Check OLT Uptime=== | ===Check OLT Uptime=== | ||
show system-group | |||
===Check OLT Board=== | ===Check OLT Board=== | ||
show card | |||
===Check OLT Processor dan Memory=== | ===Check OLT Processor dan Memory=== | ||
show processor | |||
===Check OLT Temperature=== | ===Check OLT Temperature=== | ||
show temperature | |||
===CHECKING OLT PER SLOT=== | ===CHECKING OLT PER SLOT=== | ||
show card slotno 12 | |||
===FINDING ONT BY SN NUMBER=== | ===FINDING ONT BY SN NUMBER=== | ||
sho gpon onu by sn ALCLB1C7DA30 | |||
===CHECKING ONT IP (ROUTING MODE)=== | ===CHECKING ONT IP (ROUTING MODE)=== | ||
##In This case, We used ip-host 1 | |||
##in one ONT we can create 4 IP-HOST management | |||
show gpon remote-onu ip-host gpon-onu_1/1/16:1 | |||
===RESET FACTORY ONT=== | ===RESET FACTORY ONT=== | ||
OLT-ZTE_C320#config t | |||
(config)#pon-onu | |||
(config)#pon-onu-mng gpon-onu_1/4/1:2 | |||
(gpon-onu-mng)#restore factory | |||
===HOW TO LOCK / SHUTDOWN THIRD PORT ONT=== | ===HOW TO LOCK / SHUTDOWN THIRD PORT ONT=== | ||
config t | |||
(config)#pon-onu | |||
(config)#pon-onu-mng gpon-onu_1/4/1:2 | |||
(gpon-onu-mng)#interface eth eth_0/3 state lock | |||
===HOW TO UNLOCK PORT ONT=== | ===HOW TO UNLOCK PORT ONT=== | ||
config t | |||
(config)#pon-onu | |||
(config)#pon-onu-mng gpon-onu_1/4/1:2 | |||
(gpon-onu-mng)#interface eth eth_0/3 state unlock | |||
===HOW TO RELEASE RENEW ONT AS DHCP CLIENT=== | ===HOW TO RELEASE RENEW ONT AS DHCP CLIENT=== | ||
config t | |||
(config)#pon-onu | |||
(config)#pon-onu-mng gpon-onu_1/4/1:2 | |||
(gpon-onu-mng)#ip-host 1 dhcp-enable false ping-response false traceroute-response false | |||
(gpon-onu-mng)#ip-host 1 dhcp-enable true ping-response true traceroute-response true | |||
===RESET SLOT=== | ===RESET SLOT=== | ||
reset-card slotno 12 | |||
===SWAP=== | ===SWAP=== | ||
##Use This for First Level Handling when you get Anomaly Process. | |||
##sometimes it can help you, but sometime isn’t. | |||
swap | |||
===CHECKING VLAN SUMMARY=== | ===CHECKING VLAN SUMMARY=== | ||
sho vlan sum | |||
sho vlan 600 | |||
Revision as of 11:01, 19 February 2022
command line
check ont status
show gpon onu state gpon-olt_1/2/3
check ont power
show pon power attenuation gpon-onu_1/2/3:18
check power interface
show interface optical-module-info gpon-olt_1/1/1
check ont mac address
show mac gpon onu gpon-onu_1/2/3:18
chesk ont uptaime and ont history logs
show gpon onu detail-info gpon-onu_1/2/3:18
find ont by SN number
show gpon onu by sn ZTEGC123456F
check ont version
show gpon remote-onu equip gpon-onu_1/2/3:18
check OLT uptime
show system-group
check olt board
show card
check OLT prosessor and memory
show processor
check olt card temperature
show card-temperature
Cek Detail Config di Interface ke arah ONT
show run interface gpon-onu_1/2/5:4
Cek Status Interface ONT
show gpon onu state gpon-olt_1/2/5 4
Cek Nilai Optik ONT
show pon power attenuation gpon-onu_1/2/5:4
Cek Utilisasi Bandwith Link ONT Real Time
show interface gpon-onu_1/2/5:4
Cek ONT Uptime dan History:
show gpon onu detail-info gpon-onu_1/1/16:1
Cek Mac Address Perangkat yang terkoneksi ke ONT
show mac gpon onu gpon-onu_1/1/16:1
Cek ONT Version
show gpon remote-onu equip gpon-onu_1/1/16:1
Cek Status Port di ONT
show gpon remote-onu interface eth gpon-onu_1/1/16:1
Reboot/Restart ONT
config t (config)#pon-onu (config)#pon-onu-mng gpon-onu_1/1/16:1 (gpon-onu-mng)#reboot
Shutdown Port 1 di ONT
config t (config)#pon-onu (config)#pon-onu-mng gpon-onu_1/1/16:1 (gpon-onu-mng)#interface eth eth_0/1 state lock
Cek Konfigurasi PON ONU
show onu running config gpon-onu_1/1/16:1
Check OLT Uptime
show system-group
Check OLT Board
show card
Check OLT Processor dan Memory
show processor
Check OLT Temperature
show temperature
CHECKING OLT PER SLOT
show card slotno 12
FINDING ONT BY SN NUMBER
sho gpon onu by sn ALCLB1C7DA30
CHECKING ONT IP (ROUTING MODE)
- In This case, We used ip-host 1
- in one ONT we can create 4 IP-HOST management
show gpon remote-onu ip-host gpon-onu_1/1/16:1
RESET FACTORY ONT
OLT-ZTE_C320#config t (config)#pon-onu (config)#pon-onu-mng gpon-onu_1/4/1:2 (gpon-onu-mng)#restore factory
HOW TO LOCK / SHUTDOWN THIRD PORT ONT
config t (config)#pon-onu (config)#pon-onu-mng gpon-onu_1/4/1:2 (gpon-onu-mng)#interface eth eth_0/3 state lock
HOW TO UNLOCK PORT ONT
config t (config)#pon-onu (config)#pon-onu-mng gpon-onu_1/4/1:2 (gpon-onu-mng)#interface eth eth_0/3 state unlock
HOW TO RELEASE RENEW ONT AS DHCP CLIENT
config t (config)#pon-onu (config)#pon-onu-mng gpon-onu_1/4/1:2 (gpon-onu-mng)#ip-host 1 dhcp-enable false ping-response false traceroute-response false (gpon-onu-mng)#ip-host 1 dhcp-enable true ping-response true traceroute-response true
RESET SLOT
reset-card slotno 12
SWAP
- Use This for First Level Handling when you get Anomaly Process.
- sometimes it can help you, but sometime isn’t.
swap
CHECKING VLAN SUMMARY
sho vlan sum sho vlan 600