Difference between revisions of "OLT"

From Catatan IBM
Jump to navigation Jump to search
Line 1: Line 1:
==ZTE C320==
* [[OLT: ZTE C320 profile vlan]]
* [[OLT: ZTE C320 profile vlan]]



Revision as of 16:14, 28 January 2022

ZTE C320

command line

1. check ont status

show gpon onu state gpon-olt_1/2/3


2. check ont power

show pon power attenuation gpon-onu_1/2/3:18


3. check power interface

show interface optical-module-info gpon-olt_1/1/1


4. check ont mac address

show mac gpon onu gpon-onu_1/2/3:18


5. chesk ont uptaime and ont history logs

show gpon onu detail-info gpon-onu_1/2/3:18


6. find ont by SN number

show gpon onu by sn ZTEGC123456F


7. check ont version

show gpon remote-onu equip gpon-onu_1/2/3:18


8. check OLT uptime

show system-group


9. check olt board

show card


10. check OLT prosessor and memory

show processor


11.check olt card temperature

show card-temperature


12. check olt per slot

 show card slotno 2


13. check ont ip routing mode

show gpon remote-onu ip-host  gpon-onu_1/2/1:3


14. check ont konfig

show run int gpon-onu_1/4/1:2


15. reboot ont

config t
pon-onu-mng gpon-onu_1/2/1:3
reboot


16. reset factory ont

config t
pon-onu-mng gpon-onu_1/2/1:3
restore factory


17. disable/shutdown port ont

config t
pon-onu-mng gpon-onu_1/2/1:3
interface eth eth_0/2 state lock --> disable/shutdown port number 2


18. enable/shutdown port ont

config t
pon-onu-mng gpon-onu_1/2/1:3
interface eth eth_0/2 state unlock --> enable port number 2


19. release renew ont as dhcp client

config t     >>Enter configuration commands, one per line.  End with CTRL/Z.
pon-onu
pon-onu-mng gpon-onu_1/2/1:3
ip-host 1 dhcp-enable false ping-response false traceroute-response false
ip-host 1 dhcp-enable true ping-response true traceroute-response true


20. check rx/tx level uplink port

sho int optical-module-info xgei_1/21/1


21. reset slot card

reset-card slotno 2


22. swap

Use This for First Level Handling when you get Anomaly Process. sometimes it can help you, but sometime isn’t

swap


23. show vlan summary

show vlan summary


24. check bandwidth profil

show gpon profile traffic