Difference between revisions of "Switch: Huawei Initial Config"

From Catatan IBM
Jump to navigation Jump to search
Line 46: Line 46:


==Configure the Trunk and Access Port==
==Configure the Trunk and Access Port==
*Melihat Deskripsi Interface
dis int des
display interface description
===Tipe Trunk===
===Tipe Trunk===
  system-view
  system-view
  interface XGigabitEthernet0/0/1
  interface XGigabitEthernet0/0/1
  port link-type trunk
  port link-type trunk
port trunk allow-pass 10 20 100 200
description Uplink
undo shutdown
quit
* Melihat konfigurasi Interface
display current-configuration int XGigabitEthernet0/0/1


===Tipe Data Access===
===Tipe Data Access===

Revision as of 20:33, 6 January 2026

Untuk menampilkan semua konfigurasi

display current-configuration

Untuk masuk ke mode konfig

system-view


Configure the Device Nama

Asumsi nama hostname SW-Sinyalku

sysname SW-Sinyalku

Configure the VLAN

Asumsi: ID VLAN = 10 Description = MGMT

system-view
vlan 10
description MGMT
quit
  • Pastikan Uplink Port sudah di mode Trunk dan mengizinkan vlan 10

Asumsi interface uplink berada di XGigabitEthernet0/0/1

system-view
interface XGigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 10
description **Uplink-to-Mikrolink**
undo shutdown
quit
  • Melihat Konfigurasi Interface
display current-configuration interface XGigabitEthernet0/0/1
  • Melihat status Interface
display interface XGigabitEthernet0/0/1


Configure the MGMT

Asumsi: IP Address = 192.168.10.1/24

system-view
interface vlanif 10
ip address 192.168.10.1 255.255.255.0
quit


Configure the Trunk and Access Port

  • Melihat Deskripsi Interface
dis int des
display interface description

Tipe Trunk

system-view
interface XGigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass 10 20 100 200
description Uplink
undo shutdown
quit
  • Melihat konfigurasi Interface
display current-configuration int XGigabitEthernet0/0/1

Tipe Data Access

system-view
interface GigabitEthernet0/0/1
port link-type access
port default vlan 10
undo shutdown
description kantor bendahara
quit
  • Melihat konfigurasi Interface
display current-configuration int gi0/0/1

Tipe Data Voice

system-view
interface GigabitEthernet0/0/2
port link-type hybrid
port hybrid untagged vlan 20
undo shutdown
description kantor cs
q
  • Melihat konfigurasi Interface
dis current-configuration int gi0/0/2

Configure the default Route

ip route-static 0.0.0.0 0.0.0.0 <default gateway>

Asumsi IP Gateway = 192.168.10.254

system-view
ip route-static 0.0.0.0 0.0.0.0 192.168.10.254

Configure the LACP

Create a LACP Eth-Trunk

interface Eth-Trunk <Trunk-ID>
mode lacp-static
interface eth-trunk 1
mode lacp-static
quit

interface XGigabitEthernet0/0/2
eth-trunk 1
quit

interface eth-trunk 1
port link-type trunk
port trunk allow-pass vlan 10
undo shutdown
quit
  • Melihat status
display eth-trunk 1
  • Jangan lupa untuk simpan konfigurasi yang telah dibuat
save
y