OLT: ZTE C320 Perintah Umum

From Catatan IBM
Revision as of 10:56, 19 February 2022 by Ibm (talk | contribs)
Jump to navigation Jump to search

command line

check ont status

show gpon onu state gpon-olt_1/2/3


check ont power

show pon power attenuation gpon-onu_1/2/3:18


check power interface

show interface optical-module-info gpon-olt_1/1/1


check ont mac address

show mac gpon onu gpon-onu_1/2/3:18


chesk ont uptaime and ont history logs

show gpon onu detail-info gpon-onu_1/2/3:18


find ont by SN number

show gpon onu by sn ZTEGC123456F


check ont version

show gpon remote-onu equip gpon-onu_1/2/3:18


check OLT uptime

show system-group


check olt board

show card


check OLT prosessor and memory

show processor

check olt card temperature

show card-temperature

Cek Detail Config di Interface ke arah ONT

  show run interface gpon-onu_1/2/5:4

Cek Status Interface ONT

  show gpon onu state gpon-olt_1/2/5 4
  

Cek Nilai Optik ONT

  show pon power attenuation gpon-onu_1/2/5:4
  

Cek Utilisasi Bandwith Link ONT Real Time

  show interface gpon-onu_1/2/5:4
  

Cek ONT Uptime dan History:

  show gpon onu detail-info gpon-onu_1/1/16:1
  

Cek Mac Address Perangkat yang terkoneksi ke ONT

  show mac gpon onu gpon-onu_1/1/16:1
  

Cek ONT Version

  show gpon remote-onu equip gpon-onu_1/1/16:1
  

Cek Status Port di ONT

  show gpon remote-onu interface eth gpon-onu_1/1/16:1
  

Reboot/Restart ONT

  config t
  (config)#pon-onu
  (config)#pon-onu-mng gpon-onu_1/1/16:1
  (gpon-onu-mng)#reboot
  

Shutdown Port 1 di ONT

   config t
   (config)#pon-onu
   (config)#pon-onu-mng gpon-onu_1/1/16:1
   (gpon-onu-mng)#interface eth eth_0/1 state lock
   

Cek Konfigurasi PON ONU

   show onu running config gpon-onu_1/1/16:1
   

Check OLT Uptime

   show system-group
   

Check OLT Board

   show card
   

Check OLT Processor dan Memory

   show processor
   

Check OLT Temperature

   show temperature
   

CHECKING OLT PER SLOT

   show card slotno 12
   

FINDING ONT BY SN NUMBER

   sho gpon onu by sn ALCLB1C7DA30
   

CHECKING ONT IP (ROUTING MODE)

   ##In This case, We used ip-host 1
   ##in one ONT we can create 4 IP-HOST management
   show gpon remote-onu ip-host gpon-onu_1/1/16:1
   

RESET FACTORY ONT

   OLT-ZTE_C320#config t
   (config)#pon-onu
   (config)#pon-onu-mng gpon-onu_1/4/1:2
   (gpon-onu-mng)#restore factory
   

HOW TO LOCK / SHUTDOWN THIRD PORT ONT

   config t
   (config)#pon-onu
   (config)#pon-onu-mng gpon-onu_1/4/1:2
   (gpon-onu-mng)#interface eth eth_0/3 state lock
   

HOW TO UNLOCK PORT ONT

   config t
   (config)#pon-onu
   (config)#pon-onu-mng gpon-onu_1/4/1:2
   (gpon-onu-mng)#interface eth eth_0/3 state unlock
   

HOW TO RELEASE RENEW ONT AS DHCP CLIENT

   config t
   (config)#pon-onu
   (config)#pon-onu-mng gpon-onu_1/4/1:2
   (gpon-onu-mng)#ip-host 1 dhcp-enable false ping-response false traceroute-response false
   (gpon-onu-mng)#ip-host 1 dhcp-enable true ping-response true traceroute-response true
   

RESET SLOT

   reset-card slotno 12
   

SWAP

   ##Use This for First Level Handling when you get Anomaly Process.
   ##sometimes it can help you, but sometime isn’t.
   swap
   

CHECKING VLAN SUMMARY

   sho vlan sum
   sho vlan 600